Custom Aluminum Casement Windows

The initial selection includes YSC100A, YKC80A, YKC65A, YKC110A and YKC105A casement windows, all listed as thermal-break. Use the product ID as well as the model name because YKC80A is also used for a separate tilt-and-turn catalogue entry.

The catalogue describes YKC105A as a casement window with a crank handle. If that operating method is important to your project, identify it in the inquiry. Other hardware and configuration details still need to be stated in the proposal.

Specify your required opening direction and hinge side. The range name alone should not be used to assume that every series supports both directions. Include the viewing side on the drawing so the proposed operation is unambiguous.

There are two separate catalogue records: YJ-P009 is a casement window and YJ-P010 is a tilt-and-turn window. Send the product ID or page reference with your inquiry so the intended operating type is clear.

Show the complete arrangement on an elevation drawing, including all fixed and opening sections. The dimensions, joints and documentation for that assembly need to be considered together. A single-unit image does not define the full combination.

Include the intended screen arrangement and any restriction requirement in your brief. These details must be checked with the chosen hardware and opening direction; do not assume they are standard across all listed models.

Send the required size and glass specification for review with the selected series and hardware. The size needs to be confirmed for that configuration. Overall assembly dimensions and individual sash dimensions should be identified separately.

A similar model name is not enough to establish the scope. Compare the named product, opening type, dimensions and configuration in the document with the proposed window. Use the technical document page to request the relevant record.